ARCCAPTAIN TIG Welding Foot Pedal - 2025 Upgraded Amperage Control with Adjustable Strap

Take command of your TIG welds without ever lifting a hand off the torch. This 2025 upgraded ARCCAPTAIN foot pedal gives you smooth, real-time amperage control from 0 to 200 amps, so you can dial in the exact heat your weld puddle needs - on aluminum, stainless, or mild steel. Built for serious hobbyists, fabricators, and shop pros who want clean starts, controlled fills, and crater-free finishes every time.

Engineered specifically for ARCCAPTAIN TIG200, TIG200P, TIG200P ACDC, TIG205 Pro, and TIG205P Pro welders. Plug it in, strap it on, and weld.

Will It Fit My Welder?

Designed and tested to plug directly into the following ARCCAPTAIN TIG welders - no adapters, no guesswork:

ARCCAPTAIN TIG200
ARCCAPTAIN TIG200P
ARCCAPTAIN TIG200P ACDC
ARCCAPTAIN TIG205 Pro
ARCCAPTAIN TIG205P Pro

Not Compatible: ARCCAPTAIN MIG205MP. If you plan to use this pedal with another brand of welder, please check your machine's foot control interface before ordering.

2025 Upgraded Design - Built for Real Welders

We listened to feedback from welders across the country and rebuilt this pedal from the ground up. The new 2025 version is wider, more stable, and engineered to stay put even during long sessions in the shop or out in the field.

Wider 15 cm Contact Area

The footplate jumped from 10 cm to 15 cm wide, giving your boot more room to land comfortably. Less foot fatigue, better balance, and more consistent pressure on long bead runs.

Adjustable Non-Slip Foot Strap

The new top-mounted strap holds your work boot in place so the pedal doesn't slide out from under you mid-weld. Adjusts to fit everything from sneakers to steel-toe boots.

12-Tooth Alloy Gear Drive

A precision 12-tooth alloy gear transmits pedal motion smoothly to a full-range potentiometer, eliminating jumpy or laggy amperage response.

Heavy-Duty Build

Solid housing and reinforced cable strain relief stand up to daily shop use, sparks, slag, and the kind of abuse welders actually put gear through.

Precise 0-200 Amp Control at Your Foot

This is where the pedal earns its keep. Whether you are tacking thin sheet metal or laying a hot root pass on thicker stock, the full-range potentiometer gives you a clean, linear sweep from zero all the way to your machine's max output.

Press to Heat Up

Push the pedal down to start the arc and ramp up amperage smoothly. Perfect for controlled puddle starts without blowing through thin material.

Release to Cool Down

Ease off the pedal to taper the amperage and fill your crater clean, then release fully to stop the output. No more keyhole cracks or pinholes at the end of a bead.

Full-Range Potentiometer

Linear sweep from 0 amps to your welder's full 200 amp output. No dead spots, no jumpy zones - just smooth, predictable heat control.

True Hands-Free Welding

Stop reaching for the panel mid-weld. Keep both hands on the torch and filler rod where they belong, and adjust heat with your foot in real time.

Dual Cable Setup - Plug and Play

Each pedal ships with two 10 ft (3 meter) cables so you get the right connector for your specific ARCCAPTAIN TIG welder right out of the box. No fishing for adapters, no second order needed.

Cable 1:For ARCCAPTAIN TIG200 and TIG200P

Cable 2:For TIG200P ACDC, TIG205 Pro, and TIG205P Pro

A full 10 ft cable length gives you plenty of room to position the welder where you want it and still reach the workbench, weld table, or jig comfortably.

Built for the Way You Weld

Home Shop and Hobbyist Welders

Get the same kind of foot control the pros use without spending a fortune. Ideal for garage projects, restoration work, motorcycle frames, and weekend fabrication.

Professional Fabricators

A reliable backup pedal or upgrade for your daily driver welder. The wider footplate and strap reduce fatigue on full shift days.

Trade School and Training

Teaches proper amperage control habits from day one. Smooth pedal feel helps new welders learn puddle control faster.

Aluminum and Stainless Specialists

When you are running AC TIG on aluminum or thin stainless, heat control is everything. This pedal gives you the fine adjustment those jobs demand.

Technical Specifications

Product Type	TIG Welding Foot Pedal Switch
Brand	ARCCAPTAIN
Version	2025 Upgraded
Amperage Range	0 to 200 Amps
Contact Area Width	15 cm (upgraded from 10 cm)
Internal Gear	12-Tooth Alloy Gear
Control Element	Full-Range Potentiometer
Foot Strap	Adjustable Non-Slip
Cable Length	10 ft / 3 m (each cable)
Cables Included	2 cables (covers all compatible models)
Compatible Welders	ARCCAPTAIN TIG200, TIG200P, TIG200P ACDC, TIG205 Pro, TIG205P Pro
Not Compatible	ARCCAPTAIN MIG205MP

What is in the Box

1 xARCCAPTAIN TIG Foot Pedal (2025 Upgraded)

1 xAdjustable Non-Slip Foot Strap

1 x10 ft Cable for TIG200 / TIG200P

1 x10 ft Cable for TIG200P ACDC / TIG205 Pro / TIG205P Pro

Weld Smarter, Not Harder

A good foot pedal is the difference between fighting your welder and flowing with it. This 2025 upgraded ARCCAPTAIN TIG foot pedal gives you the smooth, precise amperage control you need to lay down clean beads on aluminum, stainless, and steel - all while keeping both hands free for the torch and filler.

If you own an ARCCAPTAIN TIG200, TIG200P, TIG200P ACDC, TIG205 Pro, or TIG205P Pro, this is the pedal that was made for your machine. Add it to your cart and take real control of your next weld.